JY-R1230 Silicone Emulsifier is listed by Juyou as a silicone polyether surfactant for water-in-oil and water-in-silicone emulsions used in personal-care projects. Before a buyer approves a bulk order, the source-page claims should be converted into water-phase addition records, oil-phase compatibility checks and document controls.
The current product source identifies the INCI as Lauryl PEG-10 Tris(Trimethylsiloxy) Silylethyl Dimethicone. It lists appearance as colorless to pale yellow transparent liquid, viscosity at 25 C as 500-2000 mm2/s, relative density as about 0.958 g/cm3, closed-cup flash point above 100 C, refractive index at 25 C as 1.43, and calculated HLB around 3. Buyers should verify the latest TDS, MSDS, quotation revision and sample label before production approval.
Record the addition path before comparing texture
The source page says JY-R1230 can form stable, low-viscosity water-in-oil and water-in-silicone emulsions with light, smooth texture. That is useful for screening, but the buyer file should separate the addition process from the final sensory result. Record whether JY-R1230 was dispersed in the oil phase first, how the aqueous phase was added, the stirrer type, any high-shear step after emulsification, and the observation interval.
For foundations, sunscreen, skincare, hair-care or antiperspirant formulas, keep silicone oil, organic ester, powder load, aqueous phase ratio and preservative system in separate rows. This makes it easier to decide whether a formula issue comes from emulsifier level, oil-phase design, powder dispersion or a raw-material compatibility gap.
Records to keep in the buyer file
- Identity: product code, INCI, source page, TDS, MSDS, lot number, quotation revision and sample receipt date.
- Source specifications: appearance, viscosity at 25 C, density, flash point, refractive index and calculated HLB.
- Process record: oil-phase pre-dispersion, aqueous-phase addition rate, stirrer type, high-shear step and batch temperature.
- Formula scope: water-in-oil or water-in-silicone route, target product type, silicone oil and ester combination, powder load and test package.
- Commercial scope: sample quantity, target packaging, destination, expected annual demand and required document set.
Ask Juyou for a controlled JY-R1230 sample package
Buyers should send the target emulsion type, oil phase, aqueous phase ratio, powder or pigment load, process equipment, sample quantity, destination and required documents. Source product page: JY-R1230 Silicone Emulsifier.
For quotation and sample routing, contact Juyou at info@juyousilicone.com, call +8613915814735, or use WhatsApp: https://wa.me/8613915814735.
Frequently Asked Questions
Which JY-R1230 records should buyers check first?
Start with INCI, appearance, viscosity at 25 C, flash point, refractive index, calculated HLB, TDS, MSDS, lot number and quotation revision.
Why record the water-phase addition path?
The source guidance describes adding the aqueous phase into an oil phase containing JY-R1230, so the addition rate, stirrer and high-shear step should be recorded before judging stability.
Does low-viscosity texture prove formula compatibility?
No. Texture is only one observation; buyers also need oil-phase, powder load, particle size, separation, package and observation-time records.
What should the RFQ include?
Include formula type, oil phase, aqueous phase ratio, powder or pigment load, sample quantity, destination and required TDS, MSDS or COA documents.