A wash-durability test should describe more than the number of cycles. The detergent, washing and drying conditions, sample orientation and evaluation method all influence whether the result represents the product's care instructions.
Evaluation scope
JY-988 is listed as a two-component addition-curing textile silicone for anti-slip and decorative applications. Performance belongs to the cured coating on its intended fabric. Fabric finish, coating pattern and processing history must therefore accompany any evaluation; the material description alone does not qualify a garment or establish a safety claim.
Related material: JY-988 Textile Liquid Silicone Rubber.
Keep these variables in the record
| Item | What to record |
|---|---|
| Fabric | Record construction, fiber blend and pretreatment. |
| Coating | Define pattern, coverage and cured thickness. |
| Cure | Use the confirmed grade-specific processing instructions. |
| Use | Specify stretch, washing and contact conditions. |
Trial and review plan
- Define a wash-and-dry sequence appropriate to the intended textile. Prepare matched coated samples and retain unwashed references for appearance and attachment comparisons.
- Inspect at planned intervals, recording coating loss, edge lifting, fabric change and any relevant contact-performance result. Use consistent lighting and measurement methods.
- Compare failures by pattern location and fabric lot. If the process is revised, rerun the same protocol rather than changing the test conditions at the same time.
How to use the results
Report the complete test conditions with the outcome. A passing observation under one laboratory routine should not be converted into an unlimited wash-life statement. Keep the product's care instructions aligned with the evidence used for qualification.
Information to include in an RFQ
Provide fabric swatches, the proposed pattern, coating equipment and the intended end use. Request current component identification, processing guidance and safety documents. Agree the tests and acceptance criteria for the finished fabric before specifying a bulk grade or making an anti-slip performance claim.
Frequently asked questions
Can visual appearance alone establish wash durability?
It is one part of the assessment. Attachment and the intended functional behavior may change before the coating looks obviously damaged, so include the endpoints that matter to the finished textile.
Are these proposed checks certified results for this grade?
No. This article describes evaluation and procurement questions, not completed customer trials. Request current grade-specific documents and appropriate test evidence. The acceptance criteria must fit the actual formulation, process or assembly being qualified.
Related reading
- Textile Silicone Anti-Slip Coatings: Testing Adhesion on Finished Fabric
- Choosing a Silicone Dot Pattern for Stretch Textiles
- Color-Matched Textile Silicone: Keeping Shade and Cure Checks Separate
Discuss a sample or technical requirement
Send your application, required specification, sample quantity and destination through the Juyou inquiry form or email info@juyousilicone.com. Telephone: +86 139 1581 4735. Contact Juyou on WhatsApp. Grade availability, packaging and lead time require quotation confirmation.
Product identity source: JY-988 Textile Liquid Silicone Rubber, checked 2026-09-14. Archive placement: 2026-08-22. Prepared for first publication on 2026-09-14 as part of the historical article backfill. No earlier publication or completed application trial is claimed.