JY-T1092-115 Silicone Elastomer Gel is listed by Juyou as a dimethicone and dimethicone crosspolymer gel for personal-care formulations that need silky skin feel, matte soft-focus effect, concealing performance, oil-phase thickening and reduced stickiness. Before bulk purchase, buyers should connect those source-page claims to cold-mix process records, high-viscosity handling notes and lot documents.
The current product source lists INCI as Dimethicone (and) Dimethicone Crosspolymer. It describes appearance as light yellow to colorless, transparent to translucent gel, viscosity at 25 C as 600000-2000000 mm2/s, cross-linked polymer content as 10-25 percent, and closed-cup flash point as above 100 C. These fields should be checked against the latest TDS, MSDS and quotation file before a sample is approved.
Separate cold-mix convenience from final approval
The source page says JY-T1092-115 is easy to formulate and can be used in cold mixing processes. That is useful for laboratory screening, but it is not a guarantee that every oil phase, pigment load or finished package will remain stable. Buyers should record the oil phase, active ingredient package, intended addition level, mixing sequence, shear condition, batch temperature, filling temperature and hold observation before scale-up.
The source page also says dilution ratio and dilution rate should be controlled when emulsification or hydrophilic effects are required, and it advises against use above 100 C. If the buyer plans a hybrid system with water, hydrophilic additives or multiple silicone elastomers, keep those variables separate in the trial sheet. Do not merge a successful texture observation with stability, packaging or regulatory approval.
Records to keep in the buyer file
- Identity: product code, INCI, source page, TDS, MSDS, lot number, quotation revision and sample receipt date.
- Source specifications: appearance, viscosity at 25 C, cross-linked polymer content and closed-cup flash point.
- Process record: cold-mix sequence, shear condition, temperature, addition rate, dilution route and hold time.
- Formula scope: skincare, makeup, sun-protection, haircare, antiperspirant or biomedical evaluation route if applicable.
- Commercial scope: package option, destination port, sample quantity, annual demand and document requirements.
Ask Juyou for a controlled JY-T1092-115 sample package
Buyers should send the target formula type, oil phase, active ingredients, expected dosage range, cold-mix equipment, packaging format, sample quantity, destination and required documents. Source product page: JY-T1092-115 Silicone Elastomer Gel.
For quotation and sample routing, contact Juyou at info@juyousilicone.com, call +8613915814735, or use WhatsApp: https://wa.me/8613915814735.
Frequently Asked Questions
Which JY-T1092-115 records should buyers check first?
Start with INCI, appearance, viscosity at 25 C, cross-linked polymer content, flash point, TDS, MSDS, lot number and quotation revision.
Does cold mixing prove the finished formula is stable?
No. Cold mixing can simplify screening, but the buyer still needs texture, separation, viscosity, package and hold-time records for the finished formulation.
Why does the high viscosity range matter?
The source page lists viscosity at 25 C as 600000-2000000 mm2/s, so buyers should confirm equipment, sampling, transfer and dispersion conditions before scale-up.
What should the RFQ include?
Include formula type, oil phase, active ingredients, dosage range, cold-mix equipment, sample quantity, package requirement, destination and required TDS, MSDS or COA documents.